3M flowable finishing glaze fills pinholes, minor dents, gouges, scratches and stone chips in prepared body filler, steel, galvanized steel, aluminum, SMC, fiberglass and O.E.M. Paint. Our 2-component flowable polyester material helps collision repair shops restore the appearance of vehicles. It helps minimize staining that can occur with basecoats and clear coats over economy body filler. 3M flowable finishing glaze works well on galvanized, aluminum and throughly cured and sanded factory applied paint surfaces. Minimizes staining that can occur with basecoat/clear coat systems over body filler. This flowable, brushable product cures tack free in 30 min. Use with 3M cream hardener 05829, 05830 or 05831. Two component, stain free, tack free, self-leveling repair putty. Designed for use as a skin coat over plastic filler to fill pinholes, sand scratches, low areas or other imperfections.