.png)
.png)
Starrett 57C 57 Series Full Sized Surface Gage
STR 57C
Mfr #:57C
Requires Quote
Starrett 57C 57 Series Full Sized Surface Gage
Requires Quote
STR 57C
Mfr #:57C
Features
- Full size surface gage with attractive finish
- V-Groove on the front end which allows the spindle to adjust to any angle above or below the base
- A very positive fine adjustment through a rocker arm that makes for smooth and accurate settings
- Grooves on the side of the base for a sure and easy grip
- Nicely tapered scribers, so that you can see what you are doing
- Base is ground flat with two frictionally held gage pins in the steel base which can be pushed down and used against the edge of a surface plate or T-slot for linear work
- Designed for a wide variety of uses
- 12 in L spindle
- 3-3/4 in L x 3-3/8 in W base
- 3/8 in snug
- The new style snug at the top of the spindle comes standard with these tools
- Ground bases for accurate reference surfaces
- V-Groove in the base for cylindrical work
Documents
Additional Info
UNSPSC
41114508
Package Length
14.1
Package Width
4
Package Height
3